Airpeak Flight2.3.3 - App Store

Please wait ... The app listing is being verified for availability.
You'll be able to see results in few seconds.


Publisher Description

“Airpeak Flight” is a mobile app for comprehensive monitoring and management of Airpeak aircraft, remote controller, camera, and gimbal. From checking flight distance and battery usage, to adjusting camera settings, the app is designed to optimize the flight experience. The app is fully compatible with Alpha full-frame mirrorless cameras, allowing for camera adjustments during flight. ​

“Airpeak Flight” can be used both with manual and automated flight modes. During the “Mission Flight mode”, the app can be used to confirm the route, execute the mission, check the status of the aircraft, and monitor the equipment.​

For more information about Airpeak​
https://electronics.sony.com/airpeak

Version History ・Fixes issues with the Timeline Mission, Direct Repeat Flight, and Mapping Mission functions not working properly on iOS 18.0 and iPadOS 18.0
・Improves stability and various functions

Use after updating to the latest system software for the aircraft and the remote controller. 2.3.3 10/17/2024 ・Fixes several bugs and improves some functionalities

Use after updating to the latest system software for the aircraft and the remote controller. 2.3.2 07/11/2024 ・Further enhances the reliability of Remote ID writing, addressing specific cases where writing could fail

Use after updating to the latest system software for the aircraft and the remote controller. 2.3.1 05/23/2024 ・Improves usability during flights using the RTK:
 - Gives you the ability to add geotags to images taken in real time, with these geotagged images automatically saved to the SD card in the RTK kit Interface unit (RTK-INU1)
 - Supports the function to offset a geotag coordinate on the optical axis
 - Geotagged images will be saved into individual folders, each corresponding to a specific flight
 - A mission name is now included in the folder name
・Supports the ILCE-9M3 mirrorless interchangeable lens camera equipped with a full-frame image sensor and global shutter, and can be used in combination with the gimbal (GBL-T3)
・Fixes several bugs and improves some functionalities

Use after updating to the latest system software for the aircraft and the remote controller.
The settings that can be displayed or configured differ according to the camera model. Please refer to the release notes in the website for more details. 2.3.0 05/20/2024 ・Supports Mapping Mission, allowing you to create and execute mapping missions as automated flights
・Advanced movement has been added to Smart Obstacle Avoidance for more efficient obstacle avoidance. This function is accessible during RTH (Return to Home) or a preparation flight for Timeline Mission, Direct Repeat Flight, or Mapping Mission
・Camera shooting events, including still images and videos, can now be reproduced during Direct Repeat Flight
・Supports AF-Lock (focus lock) for the camera
・Device logs are now uploaded simultaneously with flight logs. You can disable this auto-upload function in Airpeak Flight
・Voice notifications (Japanese and English) are now available for some notifications in Airpeak Flight
・Fixes several bugs and improves some functionalities

Use after updating to the latest system software for the aircraft and the remote controller.
The settings that can be displayed or configured differ according to the camera model. Please refer to the release notes in the website for more details. 2.2.0 12/18/2023 ・Adds a function to add geotags to images taken during flights using RTK and organize the geotagged images by flight
・Number of satellites acquired for GLONASS is now displayed in the RTK settings
・Fixes several bugs and improves some functionalities

Use after updating to the latest system software for the aircraft and the remote controller.
The settings that can be displayed or configured differ according to the camera model. Please refer to the release notes in the website for more details. 2.1.0 07/07/2023 ・Adds support for the RTK GNSS (Real-Time Kinematic Global Navigation Satellite System) receiver in RTK kit (RTK-1).
・Adds support for the gimbal (GBL-PX1).
・Camera and gimbal setting changes or operations can now be made from the main controller in dual operation mode.
・Adds the camera (ILCE-7RM5) and the gimbal (GBL-PX1) as presets in Main tuning of the Gimbal settings.
・Adds support for synchronizing the date and time on a camera. When the aircraft receives GNSS signals with a mobile device connected, the date and time on the camera will be synchronized with those being received.
・Adds support for Gimbal/Camera image stabilization (Video) in combination with the camera (ILME-FX3).
・The gimbal angle is now always displayed in the mobile app.
・The video type is now displayed for a short time on the main window when switching the camera screen view.
・The video type is now always displayed on the sub window.
・Improves the tracking accuracy for the gimbal angle displayed in Airpeak Flight and made it display smoothly.
・Fixed some issues.

Use after updating to the latest system software for the aircraft and the remote controller.
The settings that can be displayed or configured differ according to the camera model. Please refer to the release notes in the website for more details. 2.0.0 04/18/2023 ・Improves usability during shooting.
 - Supports shutter sound notifications when shooting still images.
 - Supports for still image thumbnails.
・Supports for the Pre-flight check screen display. It is now possible to check remaining camera media, and check the configuration and state of the aircraft and remote controller before starting a flight, to ensure safety while flying.
・Supports for E-mount FE PZ 16-35 mm F4 G wide-angle power zoom lenses.
 - Adds as a preset under Main tuning in the Gimbal settings.
 - Zoom can now be operated from the remote controller.
・Adds Airplane mode to the main gimbal control modes. In this mode, the main gimbal follows the tilt of the aircraft, so dynamic, FPV drone-style footage can be captured.
・Mission Flight has been improved to offer support for a wide variety of use cases.
 - Progress can now be displayed during Mission Flight.
 - Supports for resuming missions from a suspend point, even after stopping, for example, to change batteries.
 - Adds a setting that points the nose of the aircraft in the direction of travel during a mission flight.
 - Adds a setting that returns the aircraft to its original flight path after manual operation with the remote controller during a mission flight.
 - Adds a feature that prevents the aircraft from getting too close to upright structures when shooting them during a mission flight.
 - When the flight path has been changed due to manual operation, the new flight path is now displayed.
・Improves an issue whereby the frame rate of videos would drop when transferred due to signal interference.
・Improves the FPV gimbal angle display in Follow mode.
・Improves geomagnetic anomaly notifications before and during flights.
・Makes it so that Auto shooting won't occur when Camera directions and shooting is set to Manual.

Use after updating to the latest system software for the aircraft and the remote controller.
The settings that can be displayed or configured differ according to the camera model. Please refer to the release notes in the website for more details. 1.4.0 10/31/2022 - Adds the information displayed on the flight screen. The display can be changed by selecting the button to switch the amount of information to display on the bottom of the flight screen
- Wind direction/Wind speed
- Luminance histogram of the main camera image
- Adds descriptions to the settings and the automated flight menus. They can be referred by selecting the information button for each menu, even offline
- Improves other functions 1.3.0 07/26/2022 - Supports the Direct Repeat Flight function
- A path you flew before can be repeated immediately offline, without having to connect to the cloud
- Adds new camera settings such as the drive mode or the file format that can be controlled
- In addition to the settings such as aperture value or shutter speed that can be controlled currently, more detailed camera settings such as the drive mode or the file format are now supported
Note: The items that can be controlled differ depending on the camera model
- Adds camera models that can use focus-related functions (displaying a focus frame, moving the focus point in some focus modes)
- Supports preview display for still images taken during a flight
- Turning on "Display still images taken as thumbnails" in Display of the General settings displays thumbnails on the lower right of the screen when still images are taken during a flight
- Added the ILCE-7M4 as a preset in the Main tuning of the Gimbal settings
- The position or order on the flight screen of various functions of the Aircraft, Remote controller, Camera or Gimbal can be changed by pressing and holding the side menu on the flight screen
- Supports the Remote ID function that broadcasts identification information via radio waves remotely
- Fixed some issues and improved the stability of application 1.2.0 06/01/2022 - Adds a roll adjustment function to the "Main control" of the gimbal
- Fixed some issues and improved the stability of application 1.1.4 04/06/2022 - Supported additional notifications about the aircraft status on the flight view
- Fixed some issues and improved the stability of application 1.1.3 02/28/2022 - Fixed some issues and improved the stability of application 1.1.2 12/13/2021 - Fixed some issues and improved the stability of application 1.1.1 11/29/2021 - Supported initialization of the aircraft and remote controller
- Supported information display about the flight-restricted airspace by tapping on the map screen
- Supported notifications on the app home page
- Fixed some issues and improved the stability of application 1.1.0 11/15/2021 1.0.1 10/25/2021



About Airpeak Flight

Airpeak Flight is a free app for iOS published in the Other list of apps, part of Network & Internet.

The company that develops Airpeak Flight is Sony Group Corporation. The latest version released by its developer is 2.3.3.

To install Airpeak Flight on your iOS device, just click the green Continue To App button above to start the installation process. The app is listed on our website since 2026-10-13 and was downloaded 0 times. We have already checked if the download link is safe, however for your own protection we recommend that you scan the downloaded app with your antivirus. Your antivirus may detect the Airpeak Flight as malware if the download link is broken.

How to install Airpeak Flight on your iOS device:

  • Click on the Continue To App button on our website. This will redirect you to the App Store.
  • Once the Airpeak Flight is shown in the iTunes listing of your iOS device, you can start its download and installation. Tap on the GET button to the right of the app to start downloading it.
  • If you are not logged-in the iOS appstore app, you'll be prompted for your your Apple ID and/or password.
  • After Airpeak Flight is downloaded, you'll see an INSTALL button to the right. Tap on it to start the actual installation of the iOS app.
  • Once installation is finished you can tap on the OPEN button to start it. Its icon will also be added to your device home screen.

Program Details


General

Publisher
Released Date
2026-10-13
Languages
English

Category

Category
Subcategory

System requirements

Operating systems
iOS

Download information

File size
246 bytes
Total downloads
0

Pricing

License model
Free
Price

Version History


Here you can find the changelog of Airpeak Flight since it was posted on our website on 2026-11-05.The latest version is 2.3.3 and it was updated on Apps112 on 05 November, 2026.See below the changes in each version:

version 2.3.3

posted on 2026-10-13

Version History ・Fixes issues with the Timeline Mission, Direct Repeat Flight, and Mapping Mission functions not working properly on iOS 18.0 and iPadOS 18.0
・Improves stability and various functions

Use after updating to the latest system software for the aircraft and the remote controller. 2.3.3 10/17/2024 ・Fixes several bugs and improves some functionalities

Use after updating to the latest system software for the aircraft and the remote controller. 2.3.2 07/11/2024 ・Further enhances the reliability of Remote ID writing, addressing specific cases where writing could fail

Use after updating to the latest system software for the aircraft and the remote controller. 2.3.1 05/23/2024 ・Improves usability during flights using the RTK:
 - Gives you the ability to add geotags to images taken in real time, with these geotagged images automatically saved to the SD card in the RTK kit Interface unit (RTK-INU1)
 - Supports the function to offset a geotag coordinate on the optical axis
 - Geotagged images will be saved into individual folders, each corresponding to a specific flight
 - A mission name is now included in the folder name
・Supports the ILCE-9M3 mirrorless interchangeable lens camera equipped with a full-frame image sensor and global shutter, and can be used in combination with the gimbal (GBL-T3)
・Fixes several bugs and improves some functionalities

Use after updating to the latest system software for the aircraft and the remote controller.
The settings that can be displayed or configured differ according to the camera model. Please refer to the release notes in the website for more details. 2.3.0 05/20/2024 ・Supports Mapping Mission, allowing you to create and execute mapping missions as automated flights
・Advanced movement has been added to Smart Obstacle Avoidance for more efficient obstacle avoidance. This function is accessible during RTH (Return to Home) or a preparation flight for Timeline Mission, Direct Repeat Flight, or Mapping Mission
・Camera shooting events, including still images and videos, can now be reproduced during Direct Repeat Flight
・Supports AF-Lock (focus lock) for the camera
・Device logs are now uploaded simultaneously with flight logs. You can disable this auto-upload function in Airpeak Flight
・Voice notifications (Japanese and English) are now available for some notifications in Airpeak Flight
・Fixes several bugs and improves some functionalities

Use after updating to the latest system software for the aircraft and the remote controller.
The settings that can be displayed or configured differ according to the camera model. Please refer to the release notes in the website for more details. 2.2.0 12/18/2023 ・Adds a function to add geotags to images taken during flights using RTK and organize the geotagged images by flight
・Number of satellites acquired for GLONASS is now displayed in the RTK settings
・Fixes several bugs and improves some functionalities

Use after updating to the latest system software for the aircraft and the remote controller.
The settings that can be displayed or configured differ according to the camera model. Please refer to the release notes in the website for more details. 2.1.0 07/07/2023 ・Adds support for the RTK GNSS (Real-Time Kinematic Global Navigation Satellite System) receiver in RTK kit (RTK-1).
・Adds support for the gimbal (GBL-PX1).
・Camera and gimbal setting changes or operations can now be made from the main controller in dual operation mode.
・Adds the camera (ILCE-7RM5) and the gimbal (GBL-PX1) as presets in Main tuning of the Gimbal settings.
・Adds support for synchronizing the date and time on a camera. When the aircraft receives GNSS signals with a mobile device connected, the date and time on the camera will be synchronized with those being received.
・Adds support for Gimbal/Camera image stabilization (Video) in combination with the camera (ILME-FX3).
・The gimbal angle is now always displayed in the mobile app.
・The video type is now displayed for a short time on the main window when switching the camera screen view.
・The video type is now always displayed on the sub window.
・Improves the tracking accuracy for the gimbal angle displayed in Airpeak Flight and made it display smoothly.
・Fixed some issues.

Use after updating to the latest system software for the aircraft and the remote controller.
The settings that can be displayed or configured differ according to the camera model. Please refer to the release notes in the website for more details. 2.0.0 04/18/2023 ・Improves usability during shooting.
 - Supports shutter sound notifications when shooting still images.
 - Supports for still image thumbnails.
・Supports for the Pre-flight check screen display. It is now possible to check remaining camera media, and check the configuration and state of the aircraft and remote controller before starting a flight, to ensure safety while flying.
・Supports for E-mount FE PZ 16-35 mm F4 G wide-angle power zoom lenses.
 - Adds as a preset under Main tuning in the Gimbal settings.
 - Zoom can now be operated from the remote controller.
・Adds Airplane mode to the main gimbal control modes. In this mode, the main gimbal follows the tilt of the aircraft, so dynamic, FPV drone-style footage can be captured.
・Mission Flight has been improved to offer support for a wide variety of use cases.
 - Progress can now be displayed during Mission Flight.
 - Supports for resuming missions from a suspend point, even after stopping, for example, to change batteries.
 - Adds a setting that points the nose of the aircraft in the direction of travel during a mission flight.
 - Adds a setting that returns the aircraft to its original flight path after manual operation with the remote controller during a mission flight.
 - Adds a feature that prevents the aircraft from getting too close to upright structures when shooting them during a mission flight.
 - When the flight path has been changed due to manual operation, the new flight path is now displayed.
・Improves an issue whereby the frame rate of videos would drop when transferred due to signal interference.
・Improves the FPV gimbal angle display in Follow mode.
・Improves geomagnetic anomaly notifications before and during flights.
・Makes it so that Auto shooting won't occur when Camera directions and shooting is set to Manual.

Use after updating to the latest system software for the aircraft and the remote controller.
The settings that can be displayed or configured differ according to the camera model. Please refer to the release notes in the website for more details. 1.4.0 10/31/2022 - Adds the information displayed on the flight screen. The display can be changed by selecting the button to switch the amount of information to display on the bottom of the flight screen
- Wind direction/Wind speed
- Luminance histogram of the main camera image
- Adds descriptions to the settings and the automated flight menus. They can be referred by selecting the information button for each menu, even offline
- Improves other functions 1.3.0 07/26/2022 - Supports the Direct Repeat Flight function
- A path you flew before can be repeated immediately offline, without having to connect to the cloud
- Adds new camera settings such as the drive mode or the file format that can be controlled
- In addition to the settings such as aperture value or shutter speed that can be controlled currently, more detailed camera settings such as the drive mode or the file format are now supported
Note: The items that can be controlled differ depending on the camera model
- Adds camera models that can use focus-related functions (displaying a focus frame, moving the focus point in some focus modes)
- Supports preview display for still images taken during a flight
- Turning on "Display still images taken as thumbnails" in Display of the General settings displays thumbnails on the lower right of the screen when still images are taken during a flight
- Added the ILCE-7M4 as a preset in the Main tuning of the Gimbal settings
- The position or order on the flight screen of various functions of the Aircraft, Remote controller, Camera or Gimbal can be changed by pressing and holding the side menu on the flight screen
- Supports the Remote ID function that broadcasts identification information via radio waves remotely
- Fixed some issues and improved the stability of application 1.2.0 06/01/2022 - Adds a roll adjustment function to the "Main control" of the gimbal
- Fixed some issues and improved the stability of application 1.1.4 04/06/2022 - Supported additional notifications about the aircraft status on the flight view
- Fixed some issues and improved the stability of application 1.1.3 02/28/2022 - Fixed some issues and improved the stability of application 1.1.2 12/13/2021 - Fixed some issues and improved the stability of application 1.1.1 11/29/2021 - Supported initialization of the aircraft and remote controller
- Supported information display about the flight-restricted airspace by tapping on the map screen
- Supported notifications on the app home page
- Fixed some issues and improved the stability of application 1.1.0 11/15/2021 1.0.1 10/25/2021

Disclaimer


Official App Store Link


We do not host Airpeak Flight on our servers. We did not scan it for viruses, adware, spyware or other type of malware. This app is hosted by Apple and passed their terms and conditions to be listed there. We recommend caution when installing it.

The App Store link for Airpeak Flight is provided to you by apps112.com without any warranties, representations or guarantees of any kind, so access it at your own risk.

If you have questions regarding this particular app contact the publisher directly. For questions about the functionalities of apps112.com contact us.





Click stars to rate this APP!

Users Rating:
  0.0/5     0
Downloads: 0
Updated At: 2026-11-05
Operating System: iOS
License Type: Free

TOP DOWNLOADS
in Network & Internet last week